Resorts & Lodging
Fishing Guides
Bait & Tackle Shops
Products & Services
Important Links
Classified Ads
Contact Us & More
Minnesota Fishing Reports
   All Posts (3whitetails)


(1) 2 3 4 ... 31 »



Buffalo, Wyoming Deer Hunt
LSF Member
Joined:
01/20/2008
From New Prague
Posts: 329
Going out to the big horn mountains just west of Buffalo Wyoming for a deer hunt toward the end of October. I (our entire group) has never been out there before and just curios what to expect. We have done a little research on google earth and what not and for sure will be doing more but just thought I would ask if any LSFers have been out that way before.

Posted on: 8/9 18:41:59
Transfer the post to other applications Transfer


helix 7 ice convertion
LSF Member
Joined:
01/20/2008
From New Prague
Posts: 329
I am putting my helix 7 ice unit on the front of my boat now and I purchased the trolling motor transducer. Question I had is do I need to purchase a longer power chord or can I just add wire to what I have so it will reach the back of the boat. As of now there is no inline fuse. It is just a short two wires (maybe six inches) that ran to the small battery in the ice pack.

Thanks for your help

Posted on: 4/30 10:54:01
Transfer the post to other applications Transfer


Re: Helix 7
LSF Member
Joined:
01/20/2008
From New Prague
Posts: 329
I have it registered and all updates were already current. I also changed it to 10 in the settings and still not getting a reading. I think its time to just try and call humminbird unless anyone else on here has any ideas.

Thanks

Posted on: 2016/12/22 11:35
Transfer the post to other applications Transfer


Re: Helix 7
LSF Member
Joined:
01/20/2008
From New Prague
Posts: 329
OK will do. And I was trying it in the fishouse in my driveway. Thank you

Posted on: 2016/12/21 21:07
Transfer the post to other applications Transfer


Re: Helix 7
LSF Member
Joined:
01/20/2008
From New Prague
Posts: 329
So today I had time to run down to cabelas and purchase the helix 7 ice model. Only problem I am having is that it was there display model because that was the only one that they had on hand. Once I got it home and took a look at everything in the box I realized that it was missing the instructions for the head unit. I have not had it on the ice yet but it seems like everything is working correctly except the GPS will not show my position. When I power it on it says that the GPS has no connection. Do any of you guys have any idea on what part of the menu I need to go to to make this work or what I could do for trouble shooting? Thanks in advance. By the way unless I did it incorrectly I did try it in simulator mode and normal mode and I also did install the lakemaster chip and in simulator mode it is reading it.

Posted on: 2016/12/21 20:21
Transfer the post to other applications Transfer


Helix 7
LSF Member
Joined:
01/20/2008
From New Prague
Posts: 329
Does anyone use a helix 7 for ice fishing? I was looking at the marcum lx7 but would also like to have GPS on the unit.

Posted on: 2016/11/25 11:02
Transfer the post to other applications Transfer


Re: motor shifting problems
LSF Member
Joined:
01/20/2008
From New Prague
Posts: 329
Thanks guys It was the shift cable so at least for this time it will be much less then a thousand!

Posted on: 2016/6/2 17:43
Transfer the post to other applications Transfer


motor shifting problems
LSF Member
Joined:
01/20/2008
From New Prague
Posts: 329
So last night I went out to try fishing and I backed the boat off the trailer and put it into neutral and then forward gear but the boat motor decided it wanted to continue running in reverse. I noticed that even with the shifter in neutral position it still is running in reverse. Anyone have any ideas of what could be wrong. Thanks in advance.

Posted on: 2016/5/31 17:24
Transfer the post to other applications Transfer


Re: tilt and trim not working on my 40 horse merc
LSF Member
Joined:
01/20/2008
From New Prague
Posts: 329
I hae problems with mine also. I can go down from the wheel but not up. Then if I go to the control in the front of the boat I can moe the motor up and down. Maybe a bad switch?

Posted on: 2016/4/19 6:51
Transfer the post to other applications Transfer


Re: choke tubes?
LSF Member
Joined:
01/20/2008
From New Prague
Posts: 329
Thanks guys

Posted on: 2016/2/26 16:32
Transfer the post to other applications Transfer



 Top
(1) 2 3 4 ... 31 »




 

 
Copyright 2004-2013 Lake State Fishing P.O. Box 577 Deerwood, MN 56444 612-414-5593
All logos and trademarks are property of their respective owners. |  Lake State Fishing |   Login lakestatefishing.com Facebook Page lakestatefishing.com Twitter Page lakestatefishing.com LinkedIn Page lakestatefishing.com YouTube Page